BackupAndUpdate.rsc

# Script name: BackupAndUpdate
#
# SCRIPT INFORMATION
#
# Script:  Mikrotik RouterOS automatic backup & update
# Version: 25.04.15
# Created: 07/08/2018
# Updated: 15/04/2025
# Author:  Alexander Tebiev
# Website: https://github.com/beeyev
# You can contact me by e-mail at tebiev@mail.com
#
# IMPORTANT!
# Minimum supported RouterOS version is v6.43.7
#
# --- MODIFY THIS SECTION AS NEEDED ---
# Notification e-mail
# (Make sure you have configured Email settings in Tools -> Email)
:local emailAddress "yourmail@example.com";

# Script mode, possible values: backup, osupdate, osnotify.
# backup    -   Only backup will be performed. (default value, if none provided)
#
# osupdate  -   Installs new RouterOS if available and creates backups before/after update (ignores `forceBackup`)
#               Sends email only when an update is found.
#               Set `forceBackup` to true to always create backups, even without updates
#
# osnotify  -   Sends email only if a new RouterOS update is found (no backups)
#               Set `forceBackup` to always create backups on every run
:local scriptMode "osupdate"

# Additional parameter if you set `scriptMode` to `osupdate` or `osnotify`
# Set `true` if you want the script to perform backup every time its fired, whatever script mode is set.
:local forceBackup false

# Backup encryption password, no encryption if no password.
:local backupPassword ""

# If true, passwords will be included in exported config.
:local sensitiveDataInConfig true

## Update channel. Possible values: stable, long-term, testing, development
:local updateChannel "stable"

# Installs patch updates only (scriptMode = "osupdate").
# Works for `stable` and `long-term` channels.
# Updates only if MAJOR.MINOR match (e.g. 6.43.2 → 6.43.6 allowed, 6.44.1 skipped).
# Sends info if a newer (non-patch) version is found.
:local installOnlyPatchUpdates false

# Include public IP info in email if set to true
:local detectPublicIpAddress true

## Allow anonymous statistics collection. (script mode and generic non-sensitive device info)
:local anonStats true

#  !!! DO NOT EDIT BELOW THIS LINE UNLESS YOU KNOW WHAT YOU’RE DOING !!!

:local scriptVersion "25.04.15"

# default and fallback public IP detection services
:local ipAddressDetectServiceDefault "https://ipv4.mikrotik.ovh/"
:local ipAddressDetectServiceFallback "https://api.ipify.org/"

#Script messages prefix
:local SMP "Bkp&Upd:"

:local exitErrorMessage "$SMP script stopped due to an error. Please check logs for more details."
:log info "\n\n$SMP Script \"Mikrotik RouterOS automatic backup & update\" v.$scriptVersion started."
:log info "$SMP Script Mode: `$scriptMode`, Update channel: `$updateChannel`, Force backup: `$forceBackup`, Install only patch updates: `$installOnlyPatchUpdates`"

## vv FUNCTIONS vv ##

# Returns currently running RouterOS version
# :put [$FuncGetRunningOsVersion]  # Output: 6.48.1
:local FuncGetRunningOsVersion do={
  :local runningOsAndChannel [/system resource get version]

  :local spacePos [:find $runningOsAndChannel " "]
  :if ([:len $spacePos] = 0) do={
    :log error "Bkp&Upd: Could not extract installed OS version string: `$runningOsAndChannel`."
    :error "Bkp&Upd: error, check logs"
  }

  :local versionOnly [:pick $runningOsAndChannel 0 $spacePos]

  :return $versionOnly
}

# Returns currently running RouterOS channel
# :put [$FuncGetRunningOsChannel]  # Output: stable
:local FuncGetRunningOsChannel do={
  :local runningOsAndChannel [/system resource get version]

  :local open [:find $runningOsAndChannel "("]
  :if ([:len $open] = 0) do={
    :log error "Bkp&Upd: Could not extract installed OS channel from version string: `$runningOsAndChannel`."
    :error "Bkp&Upd: error, check logs"
  }

  :local rest [:pick $runningOsAndChannel ($open+1) [:len $runningOsAndChannel]]
  :local close [:find $rest ")"]
  :local channel [:pick $rest 0 $close]

  :return $channel
}

# Checks if two RouterOS version strings differ only by the patch version
# :put [$FuncIsPatchUpdateOnly "6.2.1" "6.2.4"]  # Output: true
# :put [$FuncIsPatchUpdateOnly "6.2.1" "6.3.1"]  # Output: false
:local FuncIsPatchUpdateOnly do={
  :local ver1 $1
  :local ver2 $2

  # Extract the major and minor components from a version
  :local extractMajorMinor do={
    :local ver $1
    :local dot1 [:find $ver "."]
    :if ($dot1 = -1) do={ :return $ver }

    :local major [:pick $ver 0 $dot1]
    :local rest [:pick $ver ($dot1 + 1) [:len $ver]]
    :local dot2 [:find $rest "."]
    :local minor $rest
    :if ($dot2 >= 0) do={ :set minor [:pick $rest 0 $dot2] }

    :return ($major . "." . $minor)
  }

  # Compare the major and minor components of both version strings
  :if ([$extractMajorMinor $ver1] = [$extractMajorMinor $ver2]) do={
    :return true
  }
  :return false
}

# Creates backups and returns array of names
# Possible arguments:
#  $1 - file name, without extension
#  $2 - password (optional)
#  $3 - sensitive data in config (optional, default: false)
# Example:
# :put [$FuncCreateBackups "daily-backup"]
:local FuncCreateBackups do={
  :local backupName $1
  :local backupPassword $2
  :local sensitiveDataInConfig $3

  #Script messages prefix
  :local SMP "Bkp&Upd:"
  :local exitErrorMessage "$SMP script stopped due to an error. Please check logs for more details."
  :log info ("$SMP global function `FuncCreateBackups` started, input: `$backupName`")

  # validate required parameter: backupName
  :if ([:typeof $backupName] != "str" or [:len $backupName] = 0) do={
    :log error "$SMP parameter 'backupName' is required and must be a non-empty string"
    :error $exitErrorMessage
  }

  :local backupFileSys "$backupName.backup"
  :local backupFileConfig "$backupName.rsc"
  :local backupNames {$backupFileSys;$backupFileConfig}

  ## Perform system backup
  :if ([:len $backupPassword] = 0) do={
    :log info ("$SMP starting backup without password, backup name: `$backupName`")
    /system backup save dont-encrypt=yes name=$backupName
  } else={
    :log info ("$SMP starting backup with password, backup name: `$backupName`")
    /system backup save password=$backupPassword name=$backupName
  }

  :log info ("$SMP system backup created: `$backupFileSys`")

    ## Export config file
  :if ($sensitiveDataInConfig = true) do={
    :log info ("$SMP starting export config with sensitive data, backup name: `$backupName`")
    # Since RouterOS v7 it needs to be explicitly set that we want to export sensitive data
    :if ([:pick [/system resource get version] 0 1] < 7) do={
      :execute "/export compact terse file=$backupName"
    } else={
      :execute "/export compact show-sensitive terse file=$backupName"
    }
  } else={
    :log info ("$SMP starting export config without sensitive data, backup name: `$backupName`")
    /export compact hide-sensitive terse file=$backupName
  }

  :log info ("$SMP Config export complete: `$backupFileConfig`")
  :log info ("$SMP Waiting a little to ensure backup files are written")

  :delay 20s

  :if ([:len [/file find name=$backupFileSys]] > 0) do={
    :log info ("$SMP system backup file successfully saved to the file system: `$backupFileSys`")
  } else={
    :log error ("$SMP system backup was not created, file does not exist: `$backupFileSys`")
    :error $exitErrorMessage
  }

  :if ([:len [/file find name=$backupFileConfig]] > 0) do={
    :log info ("$SMP config backup file successfully saved to the file system: `$backupFileConfig`")
  } else={
    :log error ("$SMP config backup was not created, file does not exist: `$backupFileConfig`")
    :error $exitErrorMessage
  }

  :log info ("$SMP global function `FuncCreateBackups` finished. Created backups, system: `$backupFileSys`, config: `$backupFileConfig`")

  :return $backupNames
}

# Sends an email
# Parameters:
#  $1 - to (email address)
#  $2 - subject
#  $3 - body
#  $4 - file attachments (optional; pass "" if not needed)
#
# Example:
# $FuncSendEmailSafe "admin@domain.com" "Backup Done" "Backup complete." "backup1.backup"
:local FuncSendEmailSafe do={

  :local emailTo $1
  :local emailSubject $2
  :local emailBody $3
  :local emailAttachments $4

  :local SMP "Bkp&Upd:"
  :local exitErrorMessage "$SMP script stopped due to an error. Please check logs for more details."

  :log info "$SMP Attempting to send email to `$emailTo`"

  # SAFETY: wait for any previously queued email to finish
  :local waitTimeoutPre 60
  :local waitCounterPre 0
  :while (([/tool e-mail get last-status] = "resolving-dns" or [/tool e-mail get last-status] = "in-progress")) do={
    :if ($waitCounterPre >= $waitTimeoutPre) do={
      :log error "$SMP Email send aborted: previous send did not complete after $waitTimeoutPre seconds"
      :error $exitErrorMessage
    }

    :log info "$SMP Waiting for previous email to finish (status: $[/tool e-mail get last-status])..."
    :delay 1s
    :set waitCounterPre ($waitCounterPre + 1)
  }

  # Send the email
  :do {
    /tool e-mail send to=$emailTo subject=$emailSubject body=$emailBody file=$emailAttachments
  } on-error={
    :log error "$SMP Email send command failed to execute. Check logs and verify email settings."
    :error $exitErrorMessage
  }

  # Wait for send status to change from "in-progress" / "resolving-dns"
  :local waitTimeout 60
  :local waitCounter 0
  :local emailStatus ""
  :log info "$SMP Waiting for email to be sent, timeout in `$waitTimeout` seconds..."
  :while ($waitCounter < $waitTimeout) do={
    :set emailStatus [/tool e-mail get last-status]
    :if ($emailStatus != "in-progress" and $emailStatus != "resolving-dns") do={
      :log info "$SMP Email send status received: $emailStatus"

      # exit loop
      :set waitCounter $waitTimeout
    } else={
      :delay 1s
      :set waitCounter ($waitCounter + 1)
    }
  }

  # Final decision based on last status
  :if ($emailStatus = "succeeded") do={
    :log info  "$SMP Email successfully sent to `$emailTo`"
  } else={
    :log error "$SMP Email failed to send. Status: `$emailStatus`. Check logs for more details and verify email settings."
    :error $exitErrorMessage
  }
}

# Global variable to track current update step
# They need to be initialized here first to be available in the script
:global buGlobalVarTargetOsVersion

:global buGlobalVarScriptStep
:local scriptStep $buGlobalVarScriptStep
:do {/system script environment remove buGlobalVarScriptStep} on-error={}
:if ([:len $scriptStep] = 0) do={
  :set scriptStep 1
}
## ^^ FUNCTIONS ^^ ##


#
# Initial validation
#

## Check email settings
:if ([:len $emailAddress] < 3) do={
  :log error ("$SMP Parameter `\$emailAddress` is not set, or contains invalid value. Script stopped.")
  :error $exitErrorMessage
}

# Values will be defined later in the script
:local emailServer ""
:local emailFromAddress [/tool e-mail get from]

:log info "$SMP Validating email settings..."
:do {
  :set emailServer [/tool e-mail get server]
} on-error={
  # This is a workaround for the RouterOS v7.12 and older versions
  :set emailServer [/tool e-mail get address]
}
:if ($emailServer = "0.0.0.0") do={
  :log error ("$SMP Email server address is not correct: `$emailServer`, check `Tools -> Email`. Script stopped.");
  :error $exitErrorMessage
}
:if ([:len $emailFromAddress] < 3) do={
  :log error ("$SMP Email configuration FROM address is not correct: `$emailFromAddress`, check `Tools -> Email`. Script stopped.");
  :error $exitErrorMessage
}

# Script mode validation
:if ($scriptMode != "backup" and $scriptMode != "osupdate" and $scriptMode != "osnotify") do={
  :log error ("$SMP Script parameter `\$scriptMode` is not set, or contains invalid value: `$scriptMode`. Script stopped.")
  :error $exitErrorMessage
}

# Update channel validation
:if ($updateChannel != "stable" and $updateChannel != "long-term" and $updateChannel != "testing" and $updateChannel != "development") do={
  :log error ("$SMP Script parameter `\$updateChannel` is not set, or contains invalid value: `$updateChannel`. Script stopped.")
  :error $exitErrorMessage
}

# Verify if script is set to install patch updates and if the update channel is valid
:if ($scriptMode = "osupdate" and $installOnlyPatchUpdates = true) do={
  :if ($updateChannel != "stable" and $updateChannel != "long-term") do={
    :log error ("$SMP Patch-only updates enabled, but update channel `$updateChannel` is invalid. Only `stable` and `long-term` are supported. Script stopped")
    :error $exitErrorMessage
  }

  :local susRunningOsChannel [$FuncGetRunningOsChannel]

  :if ($susRunningOsChannel != "stable" and $susRunningOsChannel != "long-term") do={
    :log error ("$SMP Script is set to install only patch updates, but the installed RouterOS version is not from `stable` or `long-term` channel: `$susRunningOsChannel`. Script stopped")
    :error $exitErrorMessage
  }
}

#
# Get current date and time
#
:local rawTime [/system clock get time]
:local rawDate [/system clock get date]

# Current time in specific format `hh-mm-ss`
:local currentTime ([:pick $rawTime 0 2] . "-" . [:pick $rawTime 3 5] . "-" . [:pick $rawTime 6 8])

# Current date `YYYY-MM-DD` or `YYYY-Mon-DD`
:local currentDate "undefined"

# Check if the date is in the old format
:if ([:len [:tonum [:pick $rawDate 0 1]]] = 0) do={
  # Convert old format `nov/11/2023` → `2023-nov-11`
  :set currentDate ([:pick $rawDate 7 11] . "-" . [:pick $rawDate 0 3] . "-" . [:pick $rawDate 4 6])
} else={
  # Use new format as is `YYYY-MM-DD`
  :set currentDate $rawDate
}

:local currentDateTime ($currentDate . "-" . $currentTime)

:local deviceBoardName [/system resource get board-name]

## Check if it's a cloud hosted router
:local isCloudHostedRouter false;
:if ([:pick $deviceBoardName 0 3] = "CHR" or [:pick $deviceBoardName 0 3] = "x86") do={
  :set isCloudHostedRouter true;
};

:local deviceIdentityName     [/system identity get name];
:local deviceIdentityNameShort  [:pick $deviceIdentityName 0 18]

:local deviceRbModel        "CloudHostedRouter";
:local deviceRbSerialNumber "--"
:local deviceRbCurrentFw    "--"
:local deviceRbUpgradeFw    "--"

:if ($isCloudHostedRouter = false) do={
  :set deviceRbModel        [/system routerboard get model]
  :set deviceRbSerialNumber [/system routerboard get serial-number]
  :set deviceRbCurrentFw    [/system routerboard get current-firmware]
  :set deviceRbUpgradeFw    [/system routerboard get upgrade-firmware]
};

:local runningOsChannel [$FuncGetRunningOsChannel]
:local runningOsVersion [$FuncGetRunningOsVersion]
:local deviceOsVerAndChannelRunning [/system resource get version]

:local backupNameTemplate     "backup_v$runningOsVersion_$runningOsChannel_$currentDateTime"
:local backupNameBeforeUpdate "backup_before_update_$backupNameTemplate"
:local backupNameAfterUpdate  "backup_after_update_$backupNameTemplate"

## Email body template

:local mailSubjectPrefix  "$SMP Device - `$deviceIdentityNameShort`"

:local mailBodyCopyright  "Mikrotik RouterOS automatic backup & update (ver. $scriptVersion) \nhttps://github.com/beeyev/Mikrotik-RouterOS-automatic-backup-and-update"
:local changelogUrl     "Check RouterOS changelog: https://mikrotik.com/download/changelogs/"

:local mailBodyDeviceInfo  ""
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "Device information:")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\n---------------------")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nName: $deviceIdentityName")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nModel: $deviceRbModel")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nBoard: $deviceBoardName")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nSerial number: $deviceRbSerialNumber")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nRouterOS version: v$deviceOsVerAndChannelRunning")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nBuild time: $[/system resource get build-time]")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nRouterboard FW: $deviceRbCurrentFw")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nDevice date-time: $rawDate $rawTime ($[/system clock get time-zone-name ])")
:set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nUptime: $[/system resource get uptime]")
# IP address will be appended later if needed

:local mailAttachments  [:toarray ""]

## IP address detection
:if ($scriptStep = 1 or $scriptStep = 3) do={
  :if ($scriptStep = 3) do={
    :log info ("$SMP Waiting for one minute before continuing to the final step.")
    :delay 1m
  }
  # default values
  :local publicIpAddress "not-detected"
  :local telemetryDataQuery ""

  :if ($detectPublicIpAddress = true or $anonStats = true) do={
    :if ($anonStats = true) do={
      :set telemetryDataQuery ("\?mode=" . $scriptMode . "&scriptver=" . $scriptVersion . "&updatechannel=" . $updateChannel . "&osver=" . $runningOsVersion . "&step=" . $scriptStep . "&forcebackup=" . $forceBackup . "&onlypatchupdates=" . $installOnlyPatchUpdates . "&model=" . $deviceRbModel . "&deviceboard=" . $deviceBoardName)
    }

    :do {:set publicIpAddress ([/tool fetch http-method="get" url=($ipAddressDetectServiceDefault . $telemetryDataQuery) output=user as-value]->"data")} on-error={
      :if ($detectPublicIpAddress = true) do={
        :log warning "$SMP Failed to detect public IP using default service: `$ipAddressDetectServiceDefault`"
        :log warning "$SMP Trying fallback service: `$ipAddressDetectServiceFallback`"

        :do {:set publicIpAddress ([/tool fetch http-method="get" url=$ipAddressDetectServiceFallback output=user as-value]->"data")} on-error={
          :log warning "$SMP Could not detect public IP address using fallback detection service: `$ipAddressDetectServiceFallback`"
        }
      }
    }

    # basic safety
    :set publicIpAddress ([:pick $publicIpAddress 0 15])

    :if ($detectPublicIpAddress = true) do={
      :set mailBodyDeviceInfo ($mailBodyDeviceInfo . "\nPublic IP address: $publicIpAddress")
      :log info "$SMP Public IP address detected: `$publicIpAddress`"
    }
  }
}

## STEP 1: Create backups, check for new RouterOS, and send email
## Steps 2–3 run only if auto-update is enabled and a new version is available
:if ($scriptStep = 1) do={
  :local routerOsVersionAvailable "0.0.0"
  :local isNewOsUpdateAvailable false
  :local isLatestOsAlreadyInstalled true
  :local isOsNeedsToBeUpdated false
  :local isUpdateCheckSucceeded false
  :local isEmailNeedsToBeSent false

  :local mailSubjectPartAction ""
  :local mailPtBodyAction ""

  :local mailPtSubjectBackup ""
  :local mailPtBodyBackup ""

  # Checking for new version
  :if ($scriptMode = "osupdate" or $scriptMode = "osnotify") do={
    log info ("$SMP Setting update channel to `$updateChannel`")
    /system package update set channel=$updateChannel
    log info ("$SMP Checking for new RouterOS version. Current installed version is: `$runningOsVersion`")
    /system package update check-for-updates

    # Wait to allow the system to check for updates
    :delay 5s;

    :local packageUpdateStatus "undefined"

    :set routerOsVersionAvailable [/system package update get latest-version]
    :set packageUpdateStatus [/system package update get status]

    :if ($packageUpdateStatus = "New version is available") do={
      :log info ("$SMP New RouterOS version is available: `$routerOsVersionAvailable`")
      :set isNewOsUpdateAvailable true
      :set isLatestOsAlreadyInstalled false
      :set isUpdateCheckSucceeded true
      :set isEmailNeedsToBeSent true

      :set mailSubjectPartAction "New RouterOS available"
      :set mailPtBodyAction  "New RouterOS version is available, current version: v$runningOsVersion, new version: v$routerOsVersionAvailable. \n$changelogUrl"
    } else={
      :if ($packageUpdateStatus = "System is already up to date") do={
        :log info ("$SMP No new RouterOS version is available, the latest version is already installed: `v$runningOsVersion`")
        :set isUpdateCheckSucceeded true

        :set mailSubjectPartAction "No os update available"
        :set mailPtBodyAction  "No new RouterOS version is available, the latest version is already installed: `v$runningOsVersion`"
      } else={
        :log error ("$SMP Failed to check for new RouterOS version. Package check status: `$packageUpdateStatus`")
        :set isEmailNeedsToBeSent true

        :set mailSubjectPartAction "Error unable to check new os version"
        :set mailPtBodyAction  "An error occurred while checking for a new RouterOS version.\nStatus returned: `$packageUpdateStatus`\n\nPlease review the logs on the device for more details and verify internet connectivity."
      }
    }
  }

  # Checking if the script needs to install new os version
  :if ($scriptMode = "osupdate" and $isNewOsUpdateAvailable = true) do={
    :if ($installOnlyPatchUpdates = true) do={
      :if ([$FuncIsPatchUpdateOnly $runningOsVersion $routerOsVersionAvailable] = true) do={
        :log info "$SMP New RouterOS version is available, and it is a patch update. Current version: v$runningOsVersion, new version: v$routerOsVersionAvailable"
        :set isOsNeedsToBeUpdated true
      } else={
        :log info "$SMP The script will not install this update, because it is not a patch update. Current version: v$runningOsVersion, new version: v$routerOsVersionAvailable"
        :set mailPtBodyAction ($mailPtBodyAction . "\nThis update will not be installed, because the script is set to install only patch updates.")
      }
    } else={
      :set isOsNeedsToBeUpdated true
    }
  }


  # Checking If the script needs to create a backup
  :if ($forceBackup = true or $scriptMode = "backup" or $isOsNeedsToBeUpdated = true) do={
    :log info ("$SMP Starting backup process.")

    :set isEmailNeedsToBeSent true

    :local backupName $backupNameTemplate

    # This means it's the first step where we create a backup before the update process
    :if ($isOsNeedsToBeUpdated = true) do={
      :set backupName $backupNameBeforeUpdate

      #Email body if the purpose of the script is to update the device
      :set mailSubjectPartAction "Update preparation"
      :set mailPtBodyAction ($mailPtBodyAction . "\nThe update process for device '$deviceIdentityName' is scheduled to upgrade RouterOS from version v.$runningOsVersion to version v.$routerOsVersionAvailable (Update channel: $updateChannel)")
      :set mailPtBodyAction ($mailPtBodyAction . "\nPlease note: The update will proceed only after a successful backup.")
      :set mailPtBodyAction ($mailPtBodyAction . "\nA final report with detailed information will be sent once the update process is completed.")
      :set mailPtBodyAction ($mailPtBodyAction . "\nIf you do not receive a second email within the next 10 minutes, there may be an issue. Please check your device logs for further information.")
    }

    :do {
      :set mailAttachments [$FuncCreateBackups $backupName $backupPassword $sensitiveDataInConfig];

      :set mailPtSubjectBackup "Backup created"
      :set mailPtBodyBackup "System backups have been successfully created and attached to this email."
    } on-error={
      #failed to create backup
      :set isOsNeedsToBeUpdated false

      :set mailPtSubjectBackup "Backup failed"
      :set mailPtBodyBackup "The script failed to create backups. Please check device logs for more details."

      :log warning "$SMP Backup creation failed. Update process will be canceled if automatic update is enabled"
    }
  }

  :if ($isEmailNeedsToBeSent = true) do={
    :log info "$SMP Preparing to send email..."

    :local mailStep1Subject $mailSubjectPrefix
    :local mailStep1Body  ""

    # subject
    :if ($mailSubjectPartAction != "")  do={:set mailStep1Subject ($mailStep1Subject . " - " . $mailSubjectPartAction)}
    :if ($mailPtSubjectBackup != "")  do={:set mailStep1Subject ($mailStep1Subject . " - " . $mailPtSubjectBackup)}
    # body
    :if ($mailPtBodyAction != "") do={:set mailStep1Body ($mailStep1Body . $mailPtBodyAction . "\n\n")}
    :if ($mailPtBodyBackup != "") do={:set mailStep1Body ($mailStep1Body . $mailPtBodyBackup . "\n\n")}

    :set mailStep1Body ($mailStep1Body . $mailBodyDeviceInfo . "\n\n" . $mailBodyCopyright)

    # Send email with backups
    :do {$FuncSendEmailSafe $emailAddress $mailStep1Subject $mailStep1Body $mailAttachments} on-error={
      :set isOsNeedsToBeUpdated false
      :log error "$SMP The script will not proceed with the update process, because the email was not sent."
    }
  }

  :if ([:len $mailAttachments] > 0) do={
    :log info "$SMP Cleaning up backup files from the file system..."
    /file remove $mailAttachments;
    :delay 2s;
  }

  :if ($isOsNeedsToBeUpdated = true) do={
    :log info "$SMP everything is ready to install new RouterOS, going to start the update process and reboot the device."
    :do {
      :local nextStep 2
      :if ($isCloudHostedRouter = true) do={
        :log info "$SMP The device is a cloud hosted router, the second step updating the Routerboard firmware will be skipped."
        :set nextStep 3
      }

      :local scheduledCommand (":delay 5s; /system scheduler remove BKPUPD-NEXT-BOOT-TASK; :global buGlobalVarScriptStep $nextStep; :global buGlobalVarTargetOsVersion \"$routerOsVersionAvailable\"; :delay 10s; /system script run BackupAndUpdate;")
      /system scheduler add name=BKPUPD-NEXT-BOOT-TASK on-event=$scheduledCommand start-time=startup interval=0

      /system package update install
    } on-error={
      # Failed to install new os version, remove the task
      :do {/system scheduler remove BKPUPD-NEXT-BOOT-TASK} on-error={}

      :log error "$SMP Failed to install new RouterOS version. Please check device logs for more details."

      :local mailUpdateErrorSubject ($mailSubjectPrefix . " - Update failed")
      :local mailUpdateErrorBody "The script was unable to install new RouterOS version. Please check device logs for more details."

      # Send email with error
      $FuncSendEmailSafe $emailAddress $mailUpdateErrorSubject $mailUpdateErrorBody ""

      :error $exitErrorMessage
    }
  }
}

## STEP 2: (Post-reboot) Upgrade RouterBOARD firmware
## Runs only if auto-update is enabled and a new RouterOS version was found
:if ($scriptStep = 2) do={
  :log info "$SMP The script is in the second step, updating Routerboard firmware."

  :log info "$SMP Upgrading routerboard firmware from v.$deviceRbCurrentFw to v.$deviceRbUpgradeFw"

  /system routerboard upgrade
  :delay 2s

  :log info "$SMP routerboard upgrade process was completed, going to reboot in a moment!";

  ## Set task to send final report on the next boot
  /system scheduler add name=BKPUPD-NEXT-BOOT-TASK on-event=":delay 5s; /system scheduler remove BKPUPD-NEXT-BOOT-TASK; :global buGlobalVarScriptStep 3; :global buGlobalVarTargetOsVersion \"$buGlobalVarTargetOsVersion\"; :delay 10s; /system script run BackupAndUpdate;" start-time=startup interval=0

  /system reboot;
}

## STEP 3: Final report (after second reboot, with delay).
## Runs only if auto-update is enabled and a new RouterOS version was found.
:if ($scriptStep = 3) do={
  :log info ("$SMP The script is in the third step, sending final report.")

  :local targetOsVersion $buGlobalVarTargetOsVersion
  :do {/system script environment remove buGlobalVarTargetOsVersion} on-error={}
  :if ([:len $targetOsVersion] = 0) do={
    :log warning "$SMP Something is wrong, the script was unable to get the target updated OS version from the global variable."
  }

  :local mailStep3Subject $mailSubjectPrefix
  :local mailStep3Body  ""

  :if ($targetOsVersion = $runningOsVersion) do={
    :log info "$SMP Successfully verified new RouterOS version: target: `$targetOsVersion`, current: `$runningOsVersion`"

    :set mailStep3Subject ($mailStep3Subject . " - Update completed - Backup created")
    :set mailStep3Body ($mailStep3Body . "RouterOS and routerboard upgrade process was completed")
    :set mailStep3Body ($mailStep3Body . "\nNew RouterOS version: v.$targetOsVersion, routerboard firmware: v.$deviceRbCurrentFw")
    :set mailStep3Body ($mailStep3Body . "\n$changelogUrl\nBackups of the upgraded system are in the attachment of this email.\n\n$mailBodyDeviceInfo\n\n$mailBodyCopyright")

    :set mailAttachments [$FuncCreateBackups $backupNameAfterUpdate $backupPassword $sensitiveDataInConfig];
  } else={
    :log error "$SMP Failed to verify new RouterOS version: target: `$targetOsVersion`, current: `$runningOsVersion`"
    :set mailStep3Subject ($mailStep3Subject . " - Update failed")

    :set mailStep3Body ($mailStep3Body . "The script was unable to verify that the new RouterOS version was installed, target version: `$targetOsVersion`, current version: `$runningOsVersion`\nCheck device logs for more details.\n\n$mailBodyDeviceInfo\n\n$mailBodyCopyright")
  }

  $FuncSendEmailSafe $emailAddress $mailStep3Subject $mailStep3Body $mailAttachments

  :if ([:len $mailAttachments] > 0) do={
    :log info "$SMP Cleaning up backup files from the file system..."
    /file remove $mailAttachments;
    :delay 2s;
  }

  :log info "$SMP Final report email sent successfully, and the script has finished."
}

:log info "$SMP the script has finished, script step: `$scriptStep` \n\n"